Kits

Sort By:  
  • ARDUINO NANO KIT ()
    The Kit contains the following
    • 1 X ARDUINO NANO (compatible) http://www.robotaki.com/nano-v30-atmega328-16m-5v-micro-controller-ch340g-board-for-arduino
    • 1 X PIR MOTION SENSOR http://www.robotaki.com/pir-motion-sensor
    • 2 x MINI PUSH BUTTONS http://www.robotaki.com/mini-push-button-switch-4-pin
    • 1 x ULTRASONIC  DISTANCE SENSOR: http://www.robotaki.com/ultrasonic-distance-sensor
    • 1 X Micro servo Motor http://www.robotaki.com/micro-servo-motor-9g
    • 1 X 5V RELAY: http://www.robotaki.com/1-channel-5v-relay-module-arduino-compatible
    • 15 x JUMBER WIRES 20cm (MM, MF, FF)
    • 20X VARIOUS RESISTORS
    • 1 x 170 point breadboard (multiple colors) (http://www.robotaki.com/arduino-boards/170-tie-point-mini-braedboard-white)
    • 10 X  LEDs various colors (RED, YELLOW, GREEN)

    Add to Cart
    51.60€
  • Motor Smart Robot Car Chassis DIY Kit with Battery Box for Arduino ()
    This car is the tachometer encoder. 2 x Speed Encoder. Intelligent car chassis Tracing car Robot car chassis with code disk. Can be used for distance measurement, velocity.
    Add to Cart
    26.18€
  • The Arduino Starter Kit ()

    Here is The Arduino Starter Kit!
    This kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensor and actuators.
    The projects in the kit are:

    01 GET TO KNOW YOUR TOOLS an introduction to the concepts you'll need to use this kit
    02 SPACESHIP INTERFACE design to control panel for your startship
    03 LOVE-O-METER measure how hot-blooded you are
    04 COLOR MIXING LAMP produce any color with a lamp that uses light as an input
    05 MOOD CUE clue people in to how you're doing
    06 LIGHT THEREMIN create a musical instrument you play by waving your hands
    07 KEYBOARD INSTRUMENT play music and make some noise with this keyboard
    08 DIGITAL HOURGLASS a light-up hourglass that can stop you from working too much
    09 MOTORIZED PINWHEEL a color wheel that will have your head spinning
    10 ZOETROPE create a mechanical animation you can play forward or reverse
    11 CRYSTAL BALL a mystical tour to answer all your tough question
    12 KNOCK LOCK tap out the secret code to open the door
    13 TOUCHY-FEEL LAMP a lamp that responds to your touch
    14 TWEAK THE ARDUINO LOGO control your personal computer from your Arduino
    15 HACKING BUTTONS create a master control for all your devices!

    Once you’ve mastered this knowledge, you’ll have a palette of software and circuits that you can use to create something beautiful, and make someone smile with what you invent. 
    Then build it, hack it and share it. Because Arduino is you!
    What in the kit is listed below. Click on the name of the component to download the datasheet of the part. This document will describe the design and functionality of the component.

    1 Arduino Projects Book (170 pages)
    1 Arduino UNO board rev.3
    1 USB cable
    1 Breadboard
    1 Easy-to-assemble wooden base
    1 9v battery snap
    70 Solid core jumper wires
    2 Stranded jumper wires
    6 Photoresistor [VT90N2 LDR]
    3 Potentiometer 10kilohm
    10 Pushbuttons
    1 Temperature sensor [TMP36]
    1 Tilt sensor
    1 alphanumeric LCD (16x2 characters)
    1 LED (bright white)
    1 LED (RGB)
    8 LEDs (red)
    8 LEDs (green)
    8 LEDs (yellow)
    3 LEDs (blue)
    1 Small DC motor 6/9V
    1 Small servo motor
    1 Piezo capsule [PKM17EPP-4001-B0]
    1 H-bridge motor driver [L293D]
    2 Optocouplers [4N35]
    5 Transistor [BC547]
    2 Mosfet transistors [IRF520]
    5 Capacitors 100nF
    3 Capacitors 100uF
    5 Capacitor 100pF
    5 Diodes [1N4007]
    3 Transparent gels (red, green, blue)
    1 Male pins strip (40x1)
    20 Resistors 220 ohm
    5 Resistors 560 ohm
    5 Resistors 1 kilohm
    5 Resistors 4.7 kilohm
    20 Resistors 10 kilohm
    5 Resistors 1 megohm
    5 Resistors 10 megohm

    Add to Cart
    95.00€
  • Robotics ERP Pro Edition with Wi-Fi ()
    Robotics ERP Pro Edition 1.0 with wi-fi, including software for private and educational use, all needed connecting cables, 3 motors, 3 LED programmable lights (to simulate traffic lights), 2 infrared sensors (calibrated to colour and short distance recognition), 1 touch sensor, gears&axles system, all in sturdy plastic tub!

    Programmable robots are part of our every day life and our children are the future innovators that will be challenged to take robotics to the next level! The education system worldwide is evolving to incorporate robotics in the classroom so that students understand the fundamentals of this new technology while developing the necessary building and programming skills associated with robotics. At the same time, even at home, children are eager to experiment with robotics and integrate traditional play and fun with the electronics world which has overwhelmed their lives.

    Engino Robotics Platform (ERP) is specially designed for Primary and Secondary level students and takes into account the most modern pedagogical principles of learning. With ERP intellectual development is approached as an upward expanding spiral in which children must constantly reconstruct the ideas formed at earlier levels with new, higher order concepts acquired at the next level.

    ERP Software:

    One of the key elements of any robotics system is the programming software. Engino has developed a special software that allows 4 different methods of programming depending on the user's needs and capabilities. The robot can be programmed practically using the onboard membrane buttons. The program can be edited in the software and complex functions can be added. In addition, the ERP can be controlled from smart-phone devices as it has build in wi-fi module. Apps can be downloaded for free from Google Play and Apple store.

    ERP Specifications:

    - 32-bit ARM CORTEX-M2 micro controller.
    - 256 Kbytes FLASH, 64 Kbytes RAM.
    - USB full speed port (12 Mbit/s).
    - 7 input-output ports. They can connect up to 7 LED's
      to teach traffic lights, up to 4 sensors digital or analogue
      and up to 3 motors (servo or analogue).
    - Onboard buzzer.
    - 3 Motor output ports manually programmable
      for forward and reverse.
    - 2 LED outputs manually programmable for ON-OFF.
    - Power source: 6 AA batteries.
    - Pro version includes wi-fi.

    Downloads:

    www.enginorobotics.com

    Add to Cart
    299.00€
Per Page      1 - 4 of 4

Powered by Abantecart eCommerce Solution