Latest Products

toradex oak IO module

50.00€
Qty:
Print
The Oak IO is a USB attached digital input / output board. Each of the 24 I/Os can be configured 
individually to act as CMOS input, CMOS output or open drain I/O. The logic level of all I/Os can 
be set to 3.3V or 5V by a single jumper. 
8 of the 24 I/O lines are ESD protected and have disconnectable interfaces. The mating connectors 
feature screw terminals to allow a quick attachment of bare wires. These I/O lines are provided 
with pull up resistors to allow direct sensing of switches without external circuitry. 
For the other 16 I/O lines, a pin header with a 2.54mm pitch is provided for a simple connection 
of the inputs and outputs. 
The output lines can be set with a maximum USB latency of 1ms. The report rate for reading the 
I/O pins is user adjustable from 1ms to 65s. The minimum USB latency for reading the inputs is 
therefore 1ms. 
The Oak IO can be integrated in a custom application very easily. The operating power as well as 
real time input/output data and uncritical device configuration data are all transferred through a 
simple USB cable. The very low power consumption, including automatic entering into sleep mode, 
allows using the device not only in fixed installation, but also in mobile applications. 
 

Powered by Abantecart eCommerce Solution