LED's

Sort By:  
  • DC 0-30V 2 Wire LED Display Digital Voltage Voltmeter Panel Car Motorcycle ()
    Item specifics
    • Display Type:Digital Only
    • Operating Temperature:-10℃-+65℃
    • Accuracy Class:0.1%
    • Power Supply:DC
    • Measuring Range:DC 0.1V-30V
    • DIY Supplies:Electrical
    • Dimensions:31*21mm(L* W)
    • Model Number:Digital volt meter
    • Measuring range:DC 0.1V-30V
    • Input range:DC 2.7V-32V
    • Display:Three 0.36 "digital tube
    • Measurement accuracy:0.1%
    DESCRIPTION
     DC 0-30V 2 Wire LED Display Digital Voltage Voltmeter Panel Car Motorcycle
     Measuring range: DC 0.1V-30V            
     Input range: DC 2.7V-32V            
     Max Input: DC 32V. The device can be damaged if input is over 32V            
     Display: Three 0.36 "digital tube            
     Measurement accuracy: 0.1%            
     Refresh rate: about 300mS / times            
     Input impedance: About 100K            
     Screw holes measures :28mm            
     Operation Temp: -10 Celsius degree-+65 Celsius degree

    Add to Cart
    4.64€
  • LED'S kit of 500 ()
    Description
    Forward Voltage: Red/Yellow 1.8~2.3V, Green/Blue/White 2.8~3.6V.
    Head type: Round; Head
    Diameter: 5mm
    Visual Angle:45-50℃.
    Emitting diodes Light Color: Red,Green,Yellow,White,Blue; 100pcs for each color(5mm).
    Application: Convenient for DIY, repair equipment and electrical appliances, including for Arduino projects.
    Add to Cart
    11.90€
  • Soldering Paste with lead ()
    • Composition of soldering paste: sn:42%, bi:58%
    • Low temperature soldering paste, melting point: 138°C (280F)
    • Lead-free soldering paste, gross weight: 1.05 oz/30 g syringe
    • Syringe soldering paste flux properties: lead-free, smooth and even soldering points, reflow produces no tin beads and tin bridges
    • Lead-free solder flux tin paste Application: welding radiator modules & LED welding & high frequency welding & PCB BGA CPU SMD rework tools
    Add to Cart
    17.85€
  • WHITE LED's 5mm ()
    Need some indicators? We are big fans of these diffused red LEDs, as featured in the LoL shield. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.
    Add to Cart
    0.36€
  • NeoPixel Stick - 8 x 5050 RGB LED with Integrated Drivers ()
    WS2812 NeoPixel Stick Strip 8 Way Serial 5050 RGB LED with Integrated Controllers UK Stock
    Ideal for Arduino Projects, works great with Adafruit Neopixel Library

    Description:
    Control circuit and RGB chip are integrated in single 5050 package.
    Each LED has built-in signal reshaping circuit.
    Built-in reset circuit and power loss reset circuit.
    Each pixel of primary color can achieve 256 brightness display
       total 16777216 colors
    Scan frequency not less than 400Hz.
    Single Data Connection for all LEDs.
    Maximum 5metres between LEDs without any extra circuitry.
    30fps with 1024 pixels.
    Send data at speeds of 800Kbps.
    Internal Constant Current Source for consistent colours across all LEDs.
    Add to Cart
    5.95€
  • YELLOW LED's 5mm ()

    LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays.

    This is a very basic 5mm LED with a yellow lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.

    Add to Cart
    0.38€
  • Red LED's 3mm ()
    Need some indicators? We are big fans of these diffused red LEDs, as featured in the LoL shield. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.
    Add to Cart
    0.30€
  • New Led Ring 16x 5050 RGB LED Board with Integrated Drivers Module Geekcreit for Arduino - products that work with official Arduino boards ()
    16 ultra bright smart LED are arranged in a circle with 1.75" (44.5mm) outer diameter. 
    The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together! 
    Each LED is addressable as the driver chip is inside the LED. 
    Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. 
    Power the whole thing with 5VDC (4-7V works) and you're ready to rock.
    There is a single data line with a very timing-specific protocol. 
    Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, , PIC, mbed, etc. 
    It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. 
    As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around. 
    An 8MHz or faster processor is required.
    Comes as a single ring with 16 individually addressable RGB LEDs assembled and tested.
    Add to Cart
    7.14€
  • BLUE LED's 5mm ()
    Need some indicators? We are big fans of these diffused red LEDs, as featured in the LoL shield. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.
    Add to Cart
    0.36€
  • Red LED's 5mm ()

     LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays.

    This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.

    Add to Cart
    0.38€
  • WHITE LED's 3mm ()
    Need some indicators? We are big fans of these diffused red LEDs, as featured in the LoL shield. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.
    Add to Cart
    0.30€
  • New LED Ring 24 x WS2812 5050 RGB LED with Integrated Drivers ()
    24 ultra bright smart LED Ring are arranged in a circle with 66mm outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED.
    Add to Cart
    9.52€
  • ESP32 Basic Core loT Development Kit V2.7 ()

    Product Features

      • Based on ESP32 development
      • 16M FLASH
      • Integrated full-color high-definition IPS display panel and a variety of hardware peripherals
      • Rich resources interface, compatible with M5Stack stacking modules and sensors, highly expandable.
      • Use M5CORE BOTTOM base built-in lithium battery, 15x IO leads.
      • Compatible with multi-platform development:

    Included

      • 1x BASIC
      • 10x Dupont line
      • 1x Type-C USB(20cm)
      • 1x manual
      • 1x sticker

    Application

      • IoT Controller
      • DIY creator works
      • Smart home control

    Specifications

    Specifications Parameters
    ESP32-D0WDQ6-V3 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi
    Flash 16MB
    Input power 5V @ 500mA
    Interface TypeC x1, I2C x1
    IO G21, G22, G23, G19, G18, G3, G1, G16, G17, G2, G5, G25, G26, G35, G36
    Button Physical button x 3
    LCD screen 2.0"@320*240 ILI9342C IPS panel, maximum brightness 853nit
    Speaker 1W-0928
    USB chip CH9102F
    Antenna 2.4G 3D Antenna
    Battery 110mAh @ 3.7V
    Net weight 47.2g
    Gross weight 93g
    Product size 54mm x 54mm x 18mm
    Packing size 95 x 65 x 25mm
    Cover Material Plastic ( PC )
    Add to Cart
    65.33€
  • 10 Grid Digital Segment LED Light Bar 10 Flat Tube of Super Bright 2 Red+3 Yellow+4 Green+1 Blue Light Flat Tube ()
     10 Grid Digital Segment LED Light Bar 10 Flat Tube of Super Bright 2 Red+3 Yellow+4 Green+1 Blue Light Flat Tube
    Add to Cart
    4.17€
  • MAX7219 Dot Led Matrix Module MCU LED Display Control Module Kit For arduino ()
    MAX7219 is an integrated serial input / output common-cathode display drivers , which connects the microprocessor 7-segment digital LED display with 8 digits , bar graph can also be connected monitor or 64 separate LED. On type B BCD encoder includes an on-chip , multi-channel scanning loop , segment word drive, but also a 8x8 static RAM for storing each data . Only one external register is used to set the segment current for each LED .
     
       A convenient four-wire serial interface can connect all common microprocessor. Each data can be addressed in the update does not overwrite all of the display . MAX7219 also allows the user to select each of the data code or not coded .
     
       The entire device includes a 150μA low-power shutdown mode , analog and digital brightness control , a scan-limit register allows the user to 1-8 bits of data , there is an LED light so that all the detection mode .
     
       Requires only three IO ports can drive a dot ! No flashing dot matrix display ! Support cascade !
     
    Single module can drive a common cathode 8 * 8 dot matrix
     
       Module Operating voltage : 5V
     
       Module size : 5 cm X 3.2 cm wide X 1.5 cm high
     
       Holes with four screws , diameter 3mm, can be fixed by using our M3 studs
     
       Mdules with input and output interfaces , support for cascading multiple modules
     
    aeProduct.getSubject()
       Is a block left input port, an output port on the right .
     
       When control of a single module , simply input port receiving CPU
     
       When cascading multiple modules 3 , output and input termination CPU, the input output termination module of the first two modules of the first one , the first two modules of terminating the input of the first three modules , and so on . ..
     
       To 51 single example:
     
       VCC → 5V
     
       GND → GND
     
       DIN → P22
     
       CS → P21
     
       CLK → P20
     
    aeProduct.getSubject()
       1PCS MAX7219 dot matrix module ( finished with lattice , has tested well )
     
       5PCS DuPont line
    Add to Cart
    4.64€
  • GREEN LED's 3mm ()

    LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays.

    This is a very standard green LED. The lens is 3mm in diameter, and is diffused.
     

    • 2.0-2.4 VDC forward drop
    • Max current: 20mA
    • Suggested using current: 16-18mA
    • Luminous Intensity: 40-100mcd
    Add to Cart
    0.30€
  • GREEN LED's 5mm ()
    Need some really bright LEDs? We are big fans of these clear green LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add that extra zing to your project.
    Add to Cart
    0.38€
  • YELLOW LED's 3mm ()

     LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays.

    This is a very standard, yellow LED. The lens is 3mm in diameter and it is diffused.

    • 2.0-2.4VDC forward drop
    • Max current: 20mA
    • Suggested using current: 16-18mA
    • Luminous Intensity: 40-100mcd
    Add to Cart
    0.30€
  • HIGH POWER DIY 10W 12V 900-1000LM 6000-6500K White Bright LED module chip beads for led lamps ()

    Material: Copper + silicone + epoxy resin

    Quantity: 1
    Emitter Type: LED
    Total Emitters: 9
    Power: 10 W
    Color BIN: White
    Rate Voltage: 12 V
    Luminous Flux: 900~1000 lm
    Color Temperature: 6000~6500 K
    Application: Great for DIY project
     

    Packing List: 1 x LED module

    Add to Cart
    2.38€
  • BLUE LED's 3mm ()
    Need some indicators? We are big fans of these diffused red LEDs, as featured in the LoL shield. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.
    Add to Cart
    0.30€
Per Page      1 - 20 of 20

Powered by Abantecart eCommerce Solution