Search
Search Criteria
Products meeting the search criteria
-
Replacement Weather Station Rain Gauge - Tipping Bucket Type 0.3mm Rain / pulse ()his tipping bucket rain gauge has a magnetic reed switch that closes momentarily each time the gauge measures 0.011" (0.2794 mm) of rain.
The 9 foot (3 meter) cable terminates in an RJ11 modular plug, and can easily be extended using a common telephone extension cable.
The gauge can be easily connected to an Arduino, Rapberry Pi, or any microcontroller. Commonly a pull-up resistor (4.7k ohms is typical) will be used to pull the input pin high, and the other side of the gauge's switch will be connected to ground, pulling the pin low each time the switch closes.
https://www.sparkfun.com/products/8942
Add to Cart$29.59 -
6152UK - Wireless Vantage Pro2 Weather Station ()Vantage Pro2™ weather stations are available in both wireless and cabled versions. All include a console with LCD display, the innovative integrated sensor suite, which combines the rain collector, temperature and relative humidity sensors, and anemometer all into one package. Making setup easier than ever and improving performance and reliability. The WeatherLink software allows automated internet uploads if an ADSL or broadband connection is available. You can easily customise your weather station by adding additional consoles or one or more of the special purpose stations shown below.Add to Cart$155.54 -
BMP180 Replace BMP085 Digital Barometric Pressure Sensor Board Module For Arduino BAROMETER ()- Size: 21mm x 18mm
- 1.8V to 6V Supply Voltage
- Max I2C Speed: 3.5Mhz
- Low power consumption - 0.5uA at 1Hz I2C interface
- Full calibrated Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Add to Cart$8.47 -
Complete Vantage Vue Inc. Weatherlink PC USB datalogger ( 6250UK & 6510USB) ()Davis Vantage Vue weather stations provide accurate, reliable weather monitoring in a self-contained, easy-to-install system, giving you all the weather data you need.
The sleek but tough outdoor sensor suite sets up in minutes and starts sending data wirelessly to your console anywhere in your home or shack.
Shows current weather conditions, including indoor and outdoor temperature and humidity, barometric pressure, wind speed and direction, dew point and rainfall. You'll also get weather forecast icons, moon phase, sunrise/sunset times, graphing of weather trends, alarms and more.
The Weather Centre button displays additional data on weather variables for today and over the last 25 days. The fully-integrated, corrosion-proof sensor suite is built to take all the weather your location can give whilst the smaller profile sensor suite is designed to minimize visual impact in your garden or on your roof. The sensor suite transmits data wirelessly up to 1,000 feet (300 m).
Read more: http://www.nevadaradio.co.uk/weather-stations/davis-vantage-vue-6250uks#ixzz3Ehlzae00Add to Cart$919.07 -
Complete Vantage Vue Inc. Weatherlink PC USB datalogger & mount Tripod kit ()The Davis Vantage Vue Complete weather station with tripod mount kit is all in one weather station for the home weather watcher, school or business as includes the vantage vue weather station & weatherLink datalogger/software.Combining Davis' legendary accuracy and rugged durability into a compact weather station the new Vantage Vue weather station from davis provides you with an array of precise, reliable weather information, you'll see at an instant current weather conditions, including indoor & outdoor temperature, indoor & outdoor humidity, barometric pressure, wind speed & direction, dew point and rain fall. The vantage vue also features its unique & innovative weather center funtion thats displays additional data on weather variables for today and over the past 25 days, such as daily highs & lows, temperature changes by the hour, barometric value changes and also astronomical information such as meteor showers.Other features on this weather station include a change in weather since yesterday feature, a this time yesterday feature, weather forecast icons, moon phase, sunset/sunrise times, weather trend graphing, various weather alarms, time and date.The Vantage Vue weather station includes a distinctive easy to read indoor LCD console and a fully integrated compact and corrosn proof outdoor sensor suite that includes the anemometer, rain collecter, temperature/humidity sensor, radition shield and solar panel. The LCD console is loaded with features,such as a backlit screen and glow-in-the-dark keypad that makes viewing weather data easy, day or night. While the small but tough sensor suite is built to take any weather your location can muster freezing winters, springtime thunderstorms blistering summer sun and brisk autumn winds this sensor suite will transmit weather data to your console. The sensor suite is easy to install and features a bubble level for more accurate installation and better weather data collectionThe Davis Vantage Vue weather station transmits weather data wirelessly and has range of up to 1,000 feet (300m), with weather data packets being sent every 2.5 seconds from the sensor suite to the Vantage Vues console. In addition, Davis has made Vantage Vue weather station radio-compatible with our flagship Vantage Pro2 professional weather station so you can mix-and-match most components.The Davis Vantage Vue Weather Station provides you with all the weather data you need at an affordable price and s a great weather monitoring system for home, school, industry and agriculture.Add to Cart$1,046.33 -
WeatherLink for Vantage Pro2, Windows, Serial Port 6510SER ()For the ultimate in weather monitoring, add WeatherLink to your Vantage Pro. The WeatherLink data logger fits neatly into the Vantage Pro console, storing your weather data even when the computer is off. Transfer data to your PC whenever you like, then use the WeatherLink software to create graphs, generate summaries, and more.Add to Cart$395.91 -
Vantage Vue® Wireless Weather Station ()This wireless weather station provides accurate, reliable weather monitoring in a self-contained, easy-to-install system. Includes outdoor sensor array and LCD console.
Mounting hardware included; mounting pole sold separately.
The Davis Vantage Vue weather station combines Davis' legendary accuracy and rugged durability into a compact station that's easy to set up and use. Vantage Vue includes a sleek but tough outdoor sensor array and a distinctive LCD console. Its unique Weather Center function provides additional information on each weather variable. In addition, Davis has made Vantage Vue radio-compatible with our flagship Vantage Pro2 professional stations so you can mix-and-match most components.
Station Includes:
- Integrated Sensor Suite including temperature, wind, and rain sensors
- Console
- Mounting hardware (mounting pole sold separately)Add to Cart$636.28 -
WeatherLink for Irrigation Control (with Connector Block, serial port) 6560 ()Use your weather station to turn your irrigation system on or off. The Davis 6560 WeatherLink for Irrigation Control connector block connects directly to most irrigation systems including Rain Bird, Rain Master, and Toro. For industrial controllers, provides electronic pulses for wind, rain, and Evapotranspiration (ET). For homeowners, the Davis 6560 looks at rain and ET values to determine when to inhibit watering. Can also set console alarms to inhibit watering when temperatures are too low or winds are too high. ET monitoring requires a solar radiation sensor. Connection to a PC is not required except for initial setup.Add to Cart$692.84 -
WeatherLink for Vantage Pro2, Windows, USB (Windows XP or later) 6510USB ()For the ultimate in weather monitoring, add WeatherLink to your Vantage Vue or Vantage Pro2. The data logger fits neatly into the weather station console or Weather Envoy, storing weather data even when it's not connected to your PC. Later, download the data and use the software to create graphs, generate summaries, and more.Add to Cart$395.91 -
WeatherLink IP for Vantage Pro with internet enabled datalogger 6555 ()WeatherLinkIP for Vantage Pro®, Vantage Pro2™, or Weather Envoy™.
Post your weather data directly to the Internet without a PC—WeatherLinkIP does all the work for you. Simply plug the data logger into the back of your console or Weather Envoy and connect the cable to your cable/DSL router. Within minutes, you'll be able to see your weather data live on the Internet. WeatherLinkIP also lets you:
- Automatically upload data to third-party weather sites including CWOP, the GLOBE Program.
- Get e-mail alerts for current weather or alarm conditions.
- Download the data to your PC for all the powerful charting, graphing, and analysis as our standard WeatherLink. With Extra User License Kits, you can even download the data independently to multiple PCs—ideal for schools, agriculture, scientific fieldwork, and remote locations.
Get more details on Weatherlink.com and check the FAQ's on WeatherLinkIP. WeatherLinkIP is "plug-and-play," when used with Weatherlink.com. Simple configuration steps are required to upload to third-party weather sites or set e-mail alert conditions. Includes software on CD, data logger, and 5’ (1.5 M) cable to connect the data logger to your broadband router. Choose a logging interval of 1, 5, 10, 15, 30, 60, or 120 minutes.
Add to Cart$692.84