Latest Products
-
KY-008 Laser Transmitter Durable
4.76€ -
:MOVE mat line following and activity maps - A1 s
8.93€ -
:MOVE mini MK2 buggy kit (excl micro:bit)
50.58€ -
Micro:Bit V2
29.75€ -
Rock 4 SE
136.85€ -
BANANA-PI-M5
140.42€ -
BANANA-PI-ZERO
45.22€ -
120pcs/Box M3 Stainless Steel Screw Nut Brass Column Kit
5.36€ -
Tact Push Button Switch Boxed Kit
5.36€ -
Microbit GPIO Expansion Board Educational Shield
7.02€ -
3.7V to 5V 2A 18650 Step-up Battery Module
5.36€ -
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Step Up Module 5V
2.62€ -
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Step Up Module 3.3V
2.62€ -
DC-DC Step Up Circuit Module 3V to 5V 1A
2.62€ -
DC-DC Automatic Buck Boost Power Module Step Up and Down Board Input 3-15V Output 5V
5.36€ -
BLE5.0 Bluetooth Module
4.17€ -
GY-NEO-6MV2 GPS Module
5.36€ -
Multi-Function ProtoShield Expansion Board
8.93€ -
ESP32-CAMERA OV2640
10.12€ -
MG996R High Speed Torque Servo Motor For Smart Car
6.55€ -
MQ Series Gas Detection Module MQ-9
2.98€ -
MQ Series Gas Detection Module MQ-5
2.98€ -
MQ Series Gas Detection Module MQ-135
2.98€ -
MQ Series Gas Detection Module MQ-2
2.98€ -
MQ Series Gas Detection Module MQ-3
2.98€ -
5V ESP8266 2 Channel WiFi Relay Module
7.74€ -
1602A LCD Screen with IIC/I2C
4.52€ -
Raspberry Pi Heat Sink 3pcs
2.68€ -
Aluminum Heatsink Cooler 14 x 14 x 6mm Adhesive Kit for Cooling Raspberry Pi ( Copy )
1.49€ -
Aluminum Heatsink Cooler 10 x 14 x 6mm Adhesive Kit for Cooling Raspberry Pi
1.49€ -
12 Values 60pcs 3296W Trimmer Potentiometer
0.48€ -
TP4056 1A 5V Lithium Battery 18650 Charging Board Module Plates USB type-C
2.96€ -
2WD Smart Robot Car Chassis Kit - PURPLE
17.85€ -
2WD Smart Robot Car Chassis Kit - RED
17.85€ -
2WD Smart Robot Car Chassis Kit - BLUE
17.85€ -
MG90S 9g Servo Motor
2.98€
The STM32F405xx and STM32F407xx family is based on the high-performance ARM®Cortex®-M4 32-bit RISC core operating at a frequency of up to 168 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
The STM32F405xx and STM32F407xx family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 192 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.
All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. a true random number generator (RNG). They also feature standard and advanced communication interfaces.
Key Features
- Core: ARM®32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
- Memories
- Up to 1 Mbyte of Flash memory
- Up to 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM
- Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 1.8 V to 3.6 V application supply and I/Os
- POR, PDR, PVD and BOR
- 4-to-26 MHz crystal oscillator
- Internal 16 MHz factory-trimmed RC (1% accuracy)
- 32 kHz oscillator for RTC with calibration
- Internal 32 kHz RC with calibration
- Sleep, Stop and Standby modes
- VBATsupply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM
- 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode
- 2×12-bit D/A converters
- General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
- Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex-M4 Embedded Trace Macrocell™
- Up to 140 I/O ports with interrupt capability
- Up to 136 fast I/Os up to 84 MHz
- Up to 138 5 V-tolerant I/Os
- Up to 15 communication interfaces
- Up to 3 × I2C interfaces (SMBus/PMBus)
- Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)
- Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock
- 2 × CAN interfaces (2.0B Active)
- SDIO interface
- Advanced connectivity
- USB 2.0 full-speed device/host/OTG controller with on-chip PHY
- USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
- 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
- 8- to 14-bit parallel camera interface up to 54 Mbytes/s
- True random number generator
- CRC calculation unit
- 96-bit unique ID
- RTC: subsecond accuracy, hardware calendar
- Availability: 1
- Model: STM32F407VET6